Cannondale Dirt Mini Pump Quality trail tire inflator
Cannondale makes all sorts of bike componentry and accessories to compliment their range of mountain, gravel, and road bikes. They might be new to the best mountain bike pump market but this Dirt Mini has proved an excellent inflator for the higher volume and lower pressure needs of mountain bike and gravel bike tires.
Design and build
Cannondale has clearly made a decision to go high-quality throughout the Dirt Mini Pump. Both upper and lower sections are crisply CNC machined alloy with raised micro rib detailing for grip. The stout shaft is attached to the shorter top section and gives a stroke of up to 66cc (Cannondale’s figures). The shaft also hides the thin, flexible 24cm (9.4in) hose with a neat CNC machined head sitting securely in the top section. The head has a screw-on/off reversible chuck to set it up for Presta or Schraeder valves. A neat pop-up lever tightens the head onto the valve to reduce leaking too.
The head is covered by a silicon cover and a stepped silicon washer on the lower section keeps the shaft clean too. It also acts as the travel lock so the pump doesn’t extend when not in use. It’s supplied with a silicon strap secured asymmetric mount that fits onto bottle cage spaced bolts.
Performance
The mount is offset so that it can either stay high above larger tubes or sit in close on narrow diameter tubes. The silicon hook strap and lock washer on the pump means the whole setup is rattle free and secure too. The length and weight of the pump make it more valuable too as otherwise the Dirt can feel precarious/heavy in back pockets and might not fit in all hip packs.
That weight translates into a really high-quality feel that’s enhanced by the smooth action of the clean shaft. In fact, the close-fitting O ring sealed head is almost too snug in terms of tolerances as it can be hard to pull out when the pump is new. The all-metal head gives a clean fit on whichever valve you set it up for and the pop-up lever locks it down securely. The hose is long enough to stop any conflict with spokes or other bike parts when pumping too. The only thing you need to be careful of is hand overlap on the short top section. This can leave the fleshy part of your palm overhanging the end where it can get trapped and bitten painfully by the lower section of the pump. The abrupt metal on metal clunk at full compression and extension literally clashes with the otherwise luxury feel too.
Presuming you don’t eat your own hand, the smooth mid-volume stroke gets you up to pressure relatively quickly. It’s not the fastest pump we’ve used but then it doesn’t ramp up resistance so much that your arms will explode beyond 30 psi. It avoids the stiction issues we often have with larger diameter shaft pumps too. The solid construction makes it accidental stomp proof and it still feels totally smooth after a summer of kicking around in backpacks, kit bags, and getting dirty/dusty on the frame clip. That and the ability to get up to 50psi and beyond comfortably makes it a great choice for bikepacking adventures too.
Verdict
Cannondale’s new Dirt pump is more midi than mini and the price and weight might be an issue for some. You need to be careful not to trap your hand in it too.
The tough, top-quality machined construction, excellent sealing, and neat locking head make it a real pleasure to use on mountain and gravel bike tires. Lack of ramp-up means it’ll even work on low-pressure road tires too, although Cannondale does a dedicated road pump ($42 / £38) as well.
Tech Specs: Cannondale Dirt Mini Pump
Price: $48 / £40 / €49
Size: 240 x 26mm
Weight: 148g
